|See also:||Date:||Location:||Report:||Source:||url link:|
|October 21, 1963.||Trancas, Argentina||A disc-shaped, domed object was revealed hanging in mid-air in front of them. It had six brightly lit windows and was some 30 feet (9 meters) wide; metallic in appearance, it had a number of sections that were joined together with rivets and seams. The dome was also metallic, but it was darker and had no rivets.|
|February 1967.||Stevens Point, Portage County, Wisconsin||The witness then noticed in detail how it was of a smooth metal, no rivets, and that the lights were actually windows, which light from inside shown through.||UFO Wisconsin, Wisconsin UFO Reports||http://www.ufoinfo.com/humanoid/humanoid1967.shtml|
|February 14, 1967.||Tuscumbia, Missouri||
Witness: Claude Edwards. The surface was seamless, “like gray-green silk.” Around the lower rim there were evenly spaced oval openings. The object “it just looked like a big shell, grayish-green looking outfit. And underneath there were oblong holes where the lights were coming out. They were so bright you couldn't’t see when you got up there.
|Ted Phillips - Center for Physical Trace Research|
|August 29, 1967.||Cussac, France||Witnesses: Francois Delpeuch (13) and his sister Anne-Marie (9). No details were noticed on the sphere itself; it was perfectly smooth, without marking or visible opening.||Joel Mesnard and Claude Pavy, excerpt from FSR, Sept/Oct 1968||http://www.ufoevidence.org/cases/case705.htm|
|August 1973.||Princeton, Indiana||
The light was dotted around the cupola. It looked archaic, something out of Jules Verne, like a pickled metal, you know what I seen? When a piece of metal is heat treated, pickled, a burnished silver color? It looked like this, well you'd almost say you saw the rivets on the damned thing. Of course, I didn't seen any rivets. It was old-fashioned looking, not streamlined, (but) straight up and down, the cupola, with a little rolled edge on it.
|UFO Filter Center files||http://www.nicap.org/regenc/RegEnc.pdf|
|June 21, 1977.||Argentina||
|August 12, 1983.||Aldershot, Hampshire, United Kingdom||
Alfred Burtoo. Climbing up a set of steps into the saucer, Burtoo discovered that the ceiling was so low he had to stoop. He found himself inside a black, metallic octagonal chamber, which smelt slightly of decaying meat.
"I did not see any signs of nuts or bolts, nor did I see any seams where the object had been put together," he recalled. "What did interest me most of all was a shaft that rose up from the floor to the ceiling. The shaft was about four feet in circumference, and on the right-hand side stood two forms similar to those that walked along the towpath with me."
August 12, 1989.
|Kapustin Yar range, Astrakhan or Volgograd region, Russia|
|The disk was about 5 to 8 meters in diameter, convexo, shaped like a lens. Its surface was ideally smooth, seamless, silver metallic, indicating evident non-terrestrial technology, with a broad and slight not jutting gradual dome on top connected in the same line with the rest of the hull and a broad cylindrical base.||Boris Arharov, Pavel Laptinov (Saint Petersburg) Anton Anfalov||http://www.ufoinfo.com/humanoid/humanoid1989.shtml|
|April 19, 1993.||Black Heath, Salisbury Plains, England||The object appeared to be made of metal and carbon fiber, highly polished and seamless.||Jonathon Dillon, UFO Watch, UFO Magazine Nov/Dec 1994||http://www.ufoinfo.com/humanoid/humanoid1993.shtml|
|Building 8 at Johnson Space Center, Houston, Texas||"A NASA photographic expert said that there was a Building 8 at Johnson Space Center where they regularly airbrushed out images of UFOs from the high-resolution satellite imaging. I logged on to NASA and was able to access this department. They had huge, high-resolution images stored in their picture files. They had filtered and unfiltered, or processed and unprocessed, files.
My dial up 56K connection was very slow trying to download one of these picture files. As this was happening, I had remote control of their desktop, and by adjusting it to 4-bit color and low screen resolution, I was able to briefly see one of these pictures. It was a silvery, cigar-shaped object with geodesic spheres on either side. There were no visible seams or riveting. There was no reference to the size of the object and the picture was taken presumably by a satellite looking down on it. The object didn't look manmade or anything like what we have created. Because I was using a Java application, I could only get a screen shot of the picture -- it did not go into my temporary internet files. At my crowning moment, someone at NASA discovered what I was doing and I was disconnected." -- Gary McKinnon
|December (mid) 2007.||Dublin, Texas||
"I started looking at it. There were no bolts, no rivets, no welded seams, it was smooth, it was like a barn gray. It had cones protruding, going up into it, bigger at the bottom, going up to smaller at the top. It took off like this [shows motion with his hand]. It remained flat and took off at a 45 degree angle."
“I don’t know how you can make a piece of metal that large with no bolts, rivets, seams or welds. I’ve never seen anything like this.”